Filter
Top Products
5-1
Feature Reference
Overview
This chapter provides reference information for programming and using system
features.
Features are listed in alphabetical order.
System Programming
procedures include the procedure code (# and three-digit number) in the heading;
dial-code features include the feature code (F for
f or I for i, plus a
two- or three-digit code). Headings without codes are general call-handling topics
or Telephone Programming procedures.
Each feature includes the following information, if applicable:
■ Description ■ Examples
■ Related Features ■ Programming
■ Considerations ■ Using
■ Valid Entries (✔ = factory setting)
This chapter gives step-by-step instructions, using the following conventions:
■ All of the instructions in this chapter assume that system phones select
outside lines or pools first and standard phones select intercomStandard
phones; Automatic Line Selection for first (as determined by each
extension’s setting for Automatic Line Selection).
See Chapter 2 for a review of the methods and buttons you can use while
in programming mode.
■ Programming instructions tell you to use the D button to change
values for specific settings. You can, however, enter a value using the
dialpad if you prefer. Similarly, there are different ways to exit programming
mode as described in Chapter 2—use the method with which you are most
comfortable.
■ For Telephone Programming, this chapter provides only the instructions for
Centralized Telephone Programming.
■ Display prompts in the chapter are shown as they appear on PARTNER
Endeavor-model phones.