Filter
Top Products
Line Access Restriction (#302)
5-131
Programming
(See Figure 2-2 on page 2-19 for the location of special programming buttons
such as
s and e on system phones.)
To restrict an extension from making calls on a specific line:
1. Press
f 0 0 s s # 3 0 2 at extension
10 or 11.
2. At the
Extension:
prompt, enter the extension number to be
programmed. For example, to program extension 23, press
2 3.
3. At the
Line:
prompt, enter the line number to be restricted at this
extension. For example, to restrict line 2, press
0 2.
The current restriction displays.
4. To change the line restriction for this extension, press D until the
appropriate value displays—see “Valid Entries” on the previous page.
5. At this point:
■ To restrict another line at this extension, press n or p
until the line number shows on the display. Repeat Step 4.
■ To restrict another extension, press N P and
begin at Step 2.
6. Select another procedure or exit programming mode.