Filter
Top Products
Specifications
A-2
(continued)
Other Specifications
Specification Description
Switch Fabric
● Full digital, nonblocking
Electrical
Specifications
● 35 watts (120 BTUs/hr) per PARTNER Endeavor 362 processor module during normal power consumption
● 45 watts (154 BTUs/hr) per PARTNER Endeavor 362 processor module during maximum power consumption
● 30 watts (105 BTUs/hr) per 362EC expansion module during normal power consumption
● 40 watts (140 BTUs/hr) per 362EC expansion module during maximum power consumption
● 45 days to 6 months memory backup with 2 AAA-size standard alkaline batteries (IEC LR03)
Processor Module
Specifications
● 68306 16 Mhz processor
● 256Kbyte RAM
● 512Kbyte FLASH ROM
● Custom VLSI DSP ASIC—16bit, 52 Mhz
—VLSI = Very Large Scale Integration
—DSP = Digital Signal Processor
—ASIC = Application Specific Integrated Circuit
Extension Jack
Specifications
(Endeavor
Processor and
362EC module)
● Ringing voltage: +55VRMS Balanced ringing within a trapezoidal wave shaping
● 38- to 42-volt talk battery
● Ringing frequency: 20 HZ
Music-On-Hold
Jack Specifications
● Accepts 2 volts at 50 Kohms maximum input
● 0 – 18 dB attenuation
Environmental
Requirements-
Control Unit
● Mount on a wall at least 2 feet (0.6 meters) from the floor (wall mounting required)
● Locate within 5 feet (1.5 meters) of the network interface jacks and a properly grounded electrical outlet not
controlled by a switch, using supplied 7-foot (2.1-meter) cords
● Operating temperature 32° to + 104°F (0° to + 40°C), not in direct sunlight
● Humidity 15% – 90%, noncondensing
● For proper ventilation and easy replacement of modules, provide the following minimum clearance around the
control unit:
—5-Slot Carrier:
1 foot (0.3 meter) clearance at the top and sides and 2 feet (0.6 meter) at the front and bottom
—2-Slot Carrier or Stand-alone Endeavor processor module:
1 foot (0.3 meter) clearance at the front, top and
right side, and 2 feet (0.6 meter) at the bottom and left side
● Locate in an area free of excess moisture, corrosive gases, dust, and chemicals
Electrical
Requirements-
Control Unit
● U.S. and Canada: 90-130 VAC, 50-60 Hz, 3-prong outlet separate ground, separately fused at 15 Amps
● Grounding to comply with Underwriters Laboratories (UL) 1459:
A. An insulated grounding conductor that is not smaller in size and equivalent in insulation material and
thickness to the grounded and ungrounded branch circuit supply conductors, except that it is green with or
without one or more yellow stripes, is to be installed as part of the circuit that supplies the product or
system
B. The grounding conductor mentioned in item A is to be connected to ground at the service equipment
C. The attachment-plug receptacles in the vicinity of the product or system are all to be of a grounding type,
and the grounding conductors serving these receptacles are to be connected to earth ground at the service
equipment