Filter
Top Products
Feature Reference
5-86
These batteries are used to retain system programming settings
during a power failure. See Chapter 6, ‘‘Troubleshooting,’’, for
instructions for replacing the batteries.
— Backup-Failure Alarm messages appear if an automatic backup is
unsuccessful. The message is displayed until you clear the alarm (or
until the next successful automatic backup or system restart). See
Clearing a Backup-Failure Alarm.
Related Features
■ The System Date (#101), System Day (#102), and System Time (#103)
settings are shown as the default display.
■ You can use Display Language (#303) to identify the language in which
messages appear, if the extension has a system display phone.
■ Users can assign a name to their extension. Then, when that extension is
used to make an intercom call, group call, or transferred call, the name and
extension number appear on the system display phone receiving the call.
Similarly, users receiving a transfer return call see the name and extension
number of the person assigned to the extension that did not answer the
transferred call. See Extension Name Display for more information.
Considerations
■ The call timer is displayed along with the default display.
■ Most messages (other than the default display and Caller ID) display for
approximately 15 seconds.
■ Marked System Speed Dial numbers do not display when they are dialed.