Filter
Top Products
Feature Reference
5-74
Direct Extension Dial Record/Playback
(I892)
Description
This feature lets you record and play back the message that callers hear when a
call is answered by the Direct Extension Dial feature. The maximum length of the
message is 40 seconds.
Related Features
■ Direct Extension Dial affects incoming calls only on lines identified using
Direct Extension Dial Lines (#205).
■ You must program a button with lights on the system display phone at
extension 10 to turn Direct Extension Dial on and off. Use Direct
Extension Dial Button (#113) to program the button.
■ Calls that ring on lines programmed with Direct Extension Dial are picked
up after two rings, as a default. To change the number of rings, use Direct
Extension Dial Delay (#112).
Considerations
■ The Automatic System/Direct Extension Dial PC card is purchased
separately and must be installed. If the PC Card has not been installed,
see the
PARTNER PC Card Installation Instructions
.
■ You should record a message before using Direct Extension Dial since
there is no default message.
■ You can record only one message for this feature.
■ If you do not record a message for Direct Extension Dial, callers will not
know to enter an extension or Hunt Group number when the call is
answered.
■ You must record the Direct Extension Dial message from the system
display phone at extension 10 or 11.
■ You cannot record or play a message while Direct Extension Dial or
Automatic System Answer is answering a call. When you want to record
or play a message, turn off Direct Extension Dial and Automatic System
Answer and wait for any calls in the process of being answered by the
system to be completed.
Using
(See Figure 2-2 on page 2-19 for the location of special programming buttons
such as
s and e on system phones.)