Filter
Top Products
Manual Signaling (F13XX or F13*XX)
5-145
Manual Signaling (F13XX or F13*XX)
Description
This feature is only available on system phones.
This feature lets you program a button on your PARTNER or PARTNER Endeavor
phone that you can use to signal a predetermined co-worker’s extension. It
typically is used by a receptionist to alert a user when the user is busy on another
call. You can use a Manual Signaling button to beep, ring, or voice signal the user
at the target extension.
Related Features
■ Voice Interrupt on Busy (#312) is an alternative feature that lets a user
signal, then speak to, a user who is
active
on a call.
■ You can use the Manual Signaling button instead of dialing the two-digit
extension number required for these features: Call Coverage, Call
Forwarding/Call Follow-Me, Message Light On, Message Light Off,
Station Lock, and Voice Mailbox Transfer.
■ To transfer a call to an extension for which you have a Manual Signaling
button, press
& before pressing the Manual Signaling button. See
Transferring Calls.
Considerations
■ A PARTNER or PARTNER Endeavor phone is required at both extensions
to use this feature.
■ You must program the Manual Signaling feature code and the target
extension number on a button. Use a button with lights if you want to view
the status of the target extension, similar to an Auto Dial button.
■ You can have only one button per extension—either on the system phone
or
on the Intercom Autodialer—for a target extension. The button can be
programmed as a Manual Signaling button or as an Auto Dial button. The
lights next to the button show calling activity—see Lights for more
information.
■ If you signal an extension that has an Auto Dial or Manual Signaling button
programmed for your extension, the green light next to that button flutters to
identify your extension as the signaling extension.
■ You can signal the target extension while you are on an outside call. (This
does not initiate a one-touch transfer.)
■ A Manual Signaling button does not initiate an intercom call unless you lift
the handset or press
S, press i, and then press the Manual
Signaling button.