Filter
Top Products
Feature Reference
5-176
Programming
(See Figure 2-2 on page 2-19 for the location of special programming buttons
such as
s and e on system phones.)
To change the assignment of lines to pools:
1. Press
f 0 0 s s # 2 0 7.
2. Enter the first line to be programmed. For example, to program line 8, press
0 8. The following appears on the display:
LinestoPools L08
2 Pool 880
3. Enter the desired value (1–5)—see “Valid Entries” on the previous
page.
4. To program another line, press
n or p until the line number
shows on the display. Then repeat Step 3.
5. Select another procedure or exit programming mode.