Filter
Top Products
Feature Reference
5-222
VMS Hunt Delay (#506)
Description
This feature applies only if you have a voice messaging system.
This System Programming procedure determines when outside calls should be
answered by the Automated Attendant Service of the voice messaging system.
You can set the system for either immediate call handling (after the second ring) or
delayed call handling (after the fourth ring). Delayed call handling gives the
receptionist an opportunity to answer calls before they go to the Automated
Attendant Service.
Related Features
■ You must use Group Call Distribution (#206) to assign lines to Hunt
Group 7.
■ You must use Hunt Group Extensions (#505) to assign the extensions
associated with the voice messaging system hardware to Hunt Group 7.
Valid Entries
1 = Immediate ✔
2 = Delayed
Programming
(See Figure 2-2 on page 2-19 for the location of special programming buttons
such as
s and e on system phones.)
To change the VMS Hunt Delay setting for the voice messaging system’s
Automated Attendant service:
1. Press
f 0 0 s s # 5 0 6 at extension
10 or 11.
2. Press
D until the appropriate value displays.
3. Select another procedure or exit programming mode.