Filter
Top Products
Feature Reference
5-22
Considerations
■ The Automatic System Answer/Direct Extension Dial PC card is purchased
separately and must be installed (see
PARTNER PC Card Installation
Instructions
)
.
■ Use the Automatic System Answer Record/Playback feature to record a
message before using Automatic System Answer since there is no default
message.
■ An Automatic System Answer button must be programmed on a button with
lights on the system display phone at extensions 10. (This feature will not
work if it is programmed on a button
without
lights.)
■ Automatic System Answer can handle up to three outside calls
simultaneously.
Valid Entries
1 = Assigned
2 = Not Assigned ✔
3 = Select button (then press a programmable button to assign Automatic System
Answer to that button)
Programming
(See Figure 2-2 on page 2-19 for the location of special programming buttons
such as
s and e on system phones.)
To assign or unassign an Automatic System Answer button with lights at extension
10:
1. Press
f0 0 s s# 1 1 1.
2. If you want to assign Automatic System Answer to the first available button,
press
D until the following appears on the display:
ASA Button
1 Assigned-Ext10
If you want to unassign Automatic System Answer, press
D until the
following appears on the display:
ASA Button
2 Not Assigned
If you want to assign Automatic System Answer to a specific button, press
3. The following appears on the display:
ASA Button
3 Select Button
Then press a programmable button with lights to assign Automatic System
Answer to that button.