Filter
Top Products
Copy Settings (#399)
5-65
Copy Settings (#399)
Description
This System Programming procedure copies all of the following settings from one
extension to another:
Considerations
■ This procedure is skipped in the sequence of programming procedures
when cycling. To use this procedure, enter the code (#399) directly.
■ For each type of phone, program one extension, then use this procedure to
copy the programming from that extension to the others with the same
number of line or pool buttons.
■ Pooled extension settings can be copied to key extensions, except for
extension 10. Key extension settings can be copied to pooled extensions.
Programming
(See Figure 2-2 on page 2-19 for the location of special programming buttons
such as
s and e on system phones.)
To copy the programmed settings from one extension to another of the same type:
1. Press
f 0 0 s s # 3 9 9 at extension
10 or 11.
2. At the
Extension:
prompt, enter the source extension to copy from. For
example, to copy the current settings from extension 18, press
1 8.
#301 Line Assignment #316 Call Waiting
#302 Line Access Restriction #401 Outgoing Call Restriction
#303 Display Language #405 Disallowed List Assignments
#304 Automatic Extension Privacy #408 Allowed List Assignments
#305 Abbreviated Ringing #501 Pickup Group Extensions
#308 Distinctive Ring #502 Calling Group Extensions
#309 Intercom Dial Tone #504 Night Service Group
#310 Automatic VMS Cover #505 Hunt Group Extensions
#311 External Hotline #601 Fax Machine Extensions
#312 Voice Interrupt On Busy #607 AA Extensions
#313 Line Access Mode Line Ringing Automatic Line Selection
#314 Pool Extension Assignment Line Ringing
#315 Pool Access Restriction