Filter
Top Products
Using Telephone Programming
2-27
Using Centralized Telephone Programming
Use Centralized Telephone Programming to program features or store telephone
numbers for individual extensions from extension 10 or 11. Most features also can
be programmed on a system phone at the user’s extension. Keep in mind the
following exceptions:
■ Automatic Line Selection and Line Ringing always must be programmed
using Centralized Telephone Programming.
■ If a user has a standard phone, Personal Speed Dial Numbers for the
extension can be programmed only by using Centralized Telephone
Programming.
■ If a user has a standard phone or a non-display system phone, Extension
Name Display for the extension can be programmed only by using
Centralized Telephone Programming.
During Centralized Telephone Programming, the display phone at extension 10 or
11 takes on the characteristics of the telephone being programmed, including any
System Programming settings and lines assigned to the phone. If you have any
Figure 2-5. Example of PARTNER Endeavor-18D Phone as a Key Extension
Figure 2-6. Example of PARTNER Endeavor-6 Phone as a Pooled Extension
Any unused
line button is
programmable
Intercom Intercom
Ext.
Message
Intercom Intercom
MessageExt.