Filter
Top Products
Feature Reference
5-98
Extension Name Display
Description
Users can assign a name to their extension: up to 12 characters long on
PARTNER Endeavor-model phones. Then, when that extension is used to make
an intercom, group, or transferred call, the name appears on the system display
phone receiving the call. Similarly, users receiving a transfer return call see the
name of the person assigned to the extension that did not answer the transferred
call.
Related Features
Display Language (#303) has no effect on this feature. This means that the
extension name displays exactly as it is programmed.
Considerations
■ Any extension, regardless of the phone type on that extension, can be
programmed with a name through Centralized Telephone Programming. If
users want to program their own extension name, they must have a system
display phone at their extension.
■ You should program Extension Name Display when you first enter
Centralized Telephone Programming, before programming any other
features. If you want to program both Extension Name Display and
Automatic Line Selection (which also must be programmed when you first
enter Centralized Telephone Programming), first program Automatic Line
Selection, then exit and re-enter Centralized Telephone Programming to
program Extension Name Display.
Valid Entries
Up to 12 characters, including letters A–Z, numbers 0–9, and blank spaces. See
Table 5-1 for the corresponding codes.