Filter
Top Products
Feature Reference
5-200
System Day (#102)
Description
This System Programming procedure sets the day of the week that appears on
system display phones.
Related Features
■ Backup Programming—Automatic (#123) and Backup Programming—
Manual (#124) do not backup up the System Day.
■ Restore Programming (#125) does not restore the System Day.
Considerations
Be sure that the System Day is set correctly before using backup or restore
procedures.
Valid Entries
1 = Sun ✔
2 = Mon
3 = Tue
4 = Wed
5 = Thu
6 = Fri
7 = Sat
Programming
(See Figure 2-2 on page 2-19 for the location of special programming buttons
such as
s and e on system phones.)
To change the System Day:
1. Press
f 0 0 s s # 1 0 2 at extension
10 or 11.
2. Change the day by entering a new setting number as listed in “Valid
Entries” above. For example, to set the day to Tuesday, press
D until
the display reads:
System Day
3 Tue
3. Select another procedure or exit programming mode.