Filter
Top Products
Feature Reference
5-190
Special Dialing Functions
Description
This feature lets you add special characters for System Speed Dial numbers,
Personal Speed Dial numbers, and Auto Dial numbers, as follows:
Considerations
Special characters cannot be used when dialing a number manually.
Examples
■ Pause: To call an answering machine at 555-0529, wait 4.5 seconds, then
dial
321 to retrieve messages, enter 5 5 5 0 5 2 9 h h
h 3 2 1.
■ Recall/Centrex Feature Button: The following entry shows how to
program an Auto Dial button with a Centrex feature that you use while on a
call, for which the feature access code is *32. This example includes a
Recall signal to send a switchhook flash to the Centrex system when you
Function Button Display Description
Pause
h
P Inserts a 1.5-second pause in the dialing
sequence to wait for a response, such
as a dial tone or computer voice
message.
Recall
S
R Sends a timed switchhook flash needed
to alert the system on the other end
(such as a PBX or Centrex system), and
to use some local telephone company
custom calling features (such as Call
Waiting). Use Recall only as the first
entry in an Auto Dial or Speed Dial
number.
Stop
!
S Stops the dialing sequence until the
Auto Dial button or Speed Dial number
is used again (for example, so the user
can enter additional digits, such as a
credit card number or password). To
continue, press the Auto Dial button or
f and the two- or three-digit Speed
Dial code. (Stop cannot be programmed
from a TransTalk 9000-series phone,
since it has no
! button.)
Touch-Tone
Enable
&
T Sends touch tones over a rotary line, to
electronic equipment such as answering
machines and bank computers.