Filter
Top Products
Display
5-85
Display
Description
PARTNER Endeavor-model display phones have a 2-line, 16-character (per line)
adjustable display area for calling and programming feedback. Specifically, the
display shows:
■ Current date (excluding year), day, and time when the phone is idle
■ Number dialed when making a call
■ Duration of call (call timer)
■ Number (and name if programmed) of the extension calling when receiving
an intercom call or transferred call
■ Number (and name if programmed) of the extension returning a transferred
call when no one answers at the destination extension
■ Automated Attendant (
AA
), Voice Messaging System (
VMS
), or Direct
Extension Dial (
DXD
) when a call is transferred from an auto attendant, a
voice messaging system, or the Direct Extension Dial feature, respectively.
Transfer from AA
or
TransferFrom VMS
, or
TransferFrom DXD
if
a call is returning to your extension after an unsuccessful transfer by an
auto attendant, a voice messaging system or the Direct Dial Extension
feature, respectively.
■ Caller ID number (or name) of calling party, if applicable
■ Cover for XX
on the display of users receiving a coverage call (XX
represents the number of the extension that activated call coverage)
■ Forward:xx xx
on the display of users forwarding their calls (the first xx
represents the number of the user’s extension; the second xx represents
the number of the destination extension).
■ Wake Up
on the display of users receiving a wake up call.
■ Volume level bars, as volume is adjusted
■ Programming messages and prompts when in programming mode
■ When you are in Telephone Programming mode, the current line
assignment, feature code, or Speed Dial number (if any) assigned to a
button displays when the button is pressed.
Blank
displays if nothing is
programmed.
■
At idle extension 10 or 11 only
, specific messages appear on the top line of
the display instead of the usual day/date message in the following
circumstances. Users at these two extensions should be instructed to notify
the System Manager when such a message appears.
—
ChgBat W/PowerOn
appears when PARTNER Endeavor
processor module batteries need to be replaced. The message may
flicker on and off as the batteries near the low-power threshold.