Filter
Top Products
Pool Line Assignment (#207)
5-175
Pool Line Assignment (#207)
Description
This procedure applies only to systems configured for Hybrid mode.
This System Programming procedure assigns lines to or removes lines from the
main and auxiliary pools supported for Hybrid mode. You can change line
assignments in the main pool (880) or in any of three auxiliary pools (881, 882, or
883).
Related Features
■ You can use Pool Extension Assignment (#314) to assign pools created
with this procedure to specific extensions.
■ If you want to prevent a user at an extension from accessing all lines in a
specific pool, you must restrict the extension using Pool Access
Restriction (#315).
■ You can use Line Access Mode (#313) to change a pooled extension to a
key extension.
Considerations
■ You can assign some or all outside lines to a specific pool, but you cannot
assign a specific outside line to more than one pool.
■ Because users cannot control which line they get when they access a pool,
you should group lines with similar purposes (WATS lines, FX lines, lines
designated for a particular set of users) together in a unique pool.
■ If you have individual lines assigned to a pooled extension and you use this
procedure to change pool line assignment, be careful not to press
D
or
d to specify a pool assignment. If you do, the system will remove
that line from all extensions that have the line assigned.
Valid Entries
1 = No Pool
2 = Main Pool 880 ✔ all lines assigned
3 = Pool 881
4 = Pool 882
5 = Pool 883