Filter
Top Products
System Date (#101)
5-199
System Date (#101)
Description
This System Programming procedure sets the month, day, and year. The system
displays only the month and day on display phones when the phone is idle.
Related Features
■ The System Date is used to date-stamp the backup files when you use
Backup Programming—Automatic (#123) and Backup Programming—
Manual (#124).
■ Backup Programming—Automatic (#123) uses the System Date to
schedule the automatic backups.
■ Backup Programming—Automatic (#123) and Backup Programming—
Manual (#124) do not backup the System Date.
■ Restore Programming (#125) does not restore the System Date.
Programming
(See Figure 2-2 on page 2-19 for the location of special programming buttons
such as
s and e on system phones.)
To change the System Date:
1. Press
f 0 0 s s # 1 0 1 at extension
10 or 11.
2. Enter today’s date in the form
mmddyy
(month, day, and year), including
leading zeros for single-digit months or days. For example, to enter April
26, 1997, press
0 4 2 6 9 7. The following appears on the display:
System Date
Data 042697
3. Select another procedure or exit programming mode.