Filter
Top Products
Music-On-Hold Volume (#614)
5-153
Music-On-Hold Volume (#614)
Description
This System Programming procedure allows you to select one of seven volume
settings for the external music source provided through the Music-On-Hold jack on
the PARTNER Endeavor 362 processor module. This setting is system-wide.
Related Features
Music-On-Hold (#602) activates or deactivates the Music-On-Hold jack on the
processor module.
Considerations
Changes to the Music-On-Hold Volume setting will have immediate effect on all
calls currently receiving Music-On-Hold treatment.
Valid Entries
Programming
(See Figure 2-2 on page 2-19 for the location of special programming buttons
such as
s and e on system phones.)
To change the Music-On-Hold Volume setting:
1. Press
f 0 0 s s # 6 1 4 at extension
10 or 11.
The display shows the current setting.
2. To change the setting, press the number of the setting on the dialpad, or
press
D or d until the correct setting is displayed.
3. If you want to return the volume to the default setting, press
r.
Note: 1 = lowest volume, 10 = highest volume
1
2
3
4
5
6
7
+
+
+
+
+
+
+
✔