Filter
Top Products
Emergency Phone Number List (#406)
5-95
Programming
(See Figure 2-2 on page 2-19 for the location of special programming buttons
such as
s and e on system phones.)
To create an Emergency Phone Number List:
1. Press
f 0 0 s s # 4 0 6 at extension
10 or 11.
2. Select a list entry (01–10). For example, to select the third entry, press
0
3. The following appears on the display:
EmergencyList 03
Data - - - - - -
3. Enter the telephone number.
4. To save the telephone number in memory, you must press
e.
5. At this point:
■ To enter other phone numbers, press n to select a different
list entry and repeat Steps 3 and 4.
■ To change the phone number you just entered, press r and
repeat Steps 3 and 4.
■ To delete the phone number you just entered, press r.
6. Select another procedure or exit programming mode.