Filter
Top Products
Message Light On (F09XX)
5-149
Message Light On (F09XX)
Description
This feature turns on the message light at a specified extension (where
XX
is a
system extension number).
Related Features
■ For instructions on turning off the message light, see Message Light Off
(F10XX).
■ You may be able to use this feature to signal someone at a doorphone
extension. See Doorphone Extension (#604 and #605).
Considerations
■ This feature turns on the message light on system phones and standard
phones that have message lights. (See Standard Telephones for a list of
standard phones that have message lights.)
■ For message-waiting capability, standard phones with LED-compatible
message-waiting lights must be connected to the PARTNER Endeavor 362
processor or 362EC expansion module.
■ On a standard phone, the message light
flashes
(only when the phone is
idle) to indicate that the extension has received a message. Standard
phones can be used to make calls when plugged into any port of the
PARTNER Endeavor 362 processor or 362EC expansion module. However,
standard phones will ring only when plugged into the Tip Ring ports, which
are the bottom two ports.
■ Do not use this feature for an extension that is covered by the voice
messaging system. The voice messaging system automatically turns on
the message light at a subscriber’s extension when a message is left in the
mailbox.
■ If you use this feature to signal someone at a doorphone extension, you
must use Message Light Off to turn the light off.
■ You can program a Message Light On button on a system phone to turn the
message light on at a specific extension with one touch.
Programming
(See Figure 2-2 on page 2-19 for the location of special programming buttons
such as
s and e on system phones.)
To program a Message Light On button:
1. Press
f 0 0 s s c at extension
10 or 11.