Filter
Top Products
Outgoing Call Restriction (#401)
5-161
Valid Entries
1 = No Restriction (can make toll, local, and intercom calls) ✔
2 = Inside (intercom) Only
3 = Local (intercom and local) Only
Programming
(See Figure 2-2 on page 2-19 for the location of special programming buttons
such as
s and e on system phones.)
To identify the types of outgoing calls that can be made on all lines at an
extension:
1. Press
f 0 0 s s # 4 0 1 at extension
10 or 11.
2. At the Extension: prompt, enter the number of the extension to be
programmed. For example, to select extension 30, press
3 0.
3. To change the type of call restriction, press
D until the appropriate
value displays.
4. To program another extension, press
n or p until the
extension number shows on the display. Repeat Step 3.
5. Select another procedure or exit programming mode.