Filter
Top Products
Direct Extension Dial Button (#113)
5-69
Considerations
■ The Automatic System/Direct Extension Dial PC card is purchased
separately and must be installed (see the
PARTNER PC Card Installation
Instructions
.
■ Use the Direct Extension Dial Record/Playback to record a message
before using Direct Extension Dial since there is no default message.
■ It is recommended that you use only one automated answering option for
incoming calls (either this feature, the Automated Attendant Service of the
voice messaging system, or a PARTNER Attendant).
■ Direct Extension Dial does not transfer calls to Calling Groups.
■ This feature can handle three outside calls simultaneously.
■ If you have lines programmed for Direct Extension Dial and Automatic
System Answer, Direct Extension Dial answers the call first.
■ A Direct Extension Dial button must be programmed on a button with lights
on the system display phone at extension 10. (This feature will not work if it
is programmed on a button without lights.)
Valid Entries
1 = Assigned
2 = Not Assigned ✔
3 = Select button (then press a programmable button to assign Direct Extension
Dial to that button)
Programming
(See Figure 2-2 on page 2-19 for the location of special programming buttons
such as
s and e on system phones.)
To assign or unassign a Direct Extension Dial button with lights at extension 10:
1. Press
f 0 0 s s # 1 1 3.
2. If you want to assign Direct Extension Dial to the first available button,
press
D until the following appears on the display:
DXD Button
1 Assigned-Ext10
If you want to unassign Direct Extension Dial, press
D until the
following appears on the display:
DXD Button
2 Not Assigned