Filter
Top Products
Battery Replacement
6-7
3. Pull the batteries straight out of the metal spring clips (see Figure 6-3), and
dispose of the batteries properly.
!
CAUTION:
Do not dispose of batteries in fire. Do not recharge, disassemble, install
backwards, or mix with used or other battery types—batteries may explode
or leak and cause a burn injury.
Figure 6-3. Removing or Inserting Batteries in the Battery Assembly
4. Insert two new AAA-size standard alkaline batteries into the metal spring
clips by pushing them straight in, placing the negative (–) end of one
battery into the bottom clip, and the positive (+) end of the other battery into
the top clip.
5. With the locking latch in the unlocked position (battery icon and “minus”
icon visible), slide the battery assembly into the processor module along
the battery guides on the inside of the battery compartment (see Figure
6-4).
Figure 6-4. Inserting Battery Assembly and Batteries into Battery
Compartment
6. Make sure the battery assembly is pushed in far enough that the edges of
the assembly slip behind the plastic housing of the processor module.
Push to
insert
Pull to
remove
Tab
Locking Latch