Filter
Top Products
Wake Up Service Button (#115)
5-231
Programming
(See Figure 2-2 on page 2-19 for the location of special programming buttons
such as
s and e on system phones.)
To program a Wake Up Service button at extension 10:
1. Press
f 0 0 s s # 1 1 5 at extension
10 or 11.
2. At this point:
■ If you want to assign Wake Up Service to the first available button,
press
D until the following appears on the display:
Wake Up Button
1 Assigned-Ext10
■ If you want to remove the Wake Up Service button assignment,
press
D until the following appears on the display:
Wake Up Button
2 Not Assigned
■ If you want to assign Wake Up Service to a specific button, press 3.
The following appears on the display:
Wake Up Button
3 Select Button
Then press a programmable button with lights to assign Wake Up
Service to that button.
3. Select another procedure or exit programming mode.
4. Label the Wake Up Service button at extension 10.
Using
To schedule a wake up call for a specific extension:
1. Press the Wake Up Service button at extension 10.
The green light next to the Wake Up Service button flutters. Wake Up
Service is activated and the display reads:
Wake Up
2. Dial the two-digit extension number of the desired extension (or use an
Auto Dial button). For example, to schedule a wake up call for extension 32,
press 3 2. The following appears on the display:
Wake Up 32 -:-