Filter
Top Products
VMS Cover Rings (#117)
5-221
VMS Cover Rings (#117)
Description
This feature applies only if you have a voice messaging system.
This System Programming procedure, which applies to all system extensions
programmed for VMS Cover, defines the number of times a call rings before it is
sent to a user’s voice mailbox.
Related Features
■ VMS Cover also applies to lines that have been designated an owner with
Line Coverage Extension (#208).
■ If an extension has VMS Cover or Automatic VMS Cover (#310) active,
unanswered calls to that extension are routed to the voice messaging
system after the specified number of VMS Cover Rings.
Valid Entries
1–9
3 ✔
Programming
(See Figure 2-2 on page 2-19 for the location of special programming buttons
such as
s and e on system phones.)
To change the number of times calls ring before being sent to the voice messaging
system:
1. Press
f 0 0 s s # 1 1 7 at extension
10 or 11.
2. Enter a setting (1–9). For example, to set VMS Cover Rings to 4, press
D or d until the following appears on the display:
VMS Cover
4 Rings
3. Select another procedure or exit programming mode.