Filter
Top Products
Feature Reference
5-120
Programming
(See Figure 2-2 on page 2-19 for the location of special programming buttons
such as
s and e on system phones.)
To identify a hotline extension and its alert extension:
1. Press
f 0 0 s s # 6 0 3 at extension
10 or 11
.
2. At the
Extension:
prompt, enter the hotline extension number. For
example, to program extension 33 as the hotline, press
3 3.
3. At the
Data
- - - - - - - - - - - - prompt, enter the alert extension number—
see “Valid Entries” on the previous page. For example, to program
extension 32 as the alert extension, press
3 2. The following appears on
the display:
HotLine Ext 33
Data 32
4. At this point:
■ To change the hotline and alert extension numbers you just entered,
repeat Steps 2 and 3.
■ To delete the existing hotline and alert extension numbers, press
r.
■ To identify another hotline and alert extension pair, press n or
p until the new hotline extension number shows on the
display. Then repeat Step 3.
5. Select another procedure or exit programming mode.
Using
To use the hotline phone:
1. Lift the handset of the hotline phone.
The designated alert extension rings.
2. When the call is answered, speak into the handset.