Filter
Top Products
Message Light Off (F10XX)
5-147
Message Light Off (F10XX)
Description
This feature turns off the message light at a specified extension (where XX is a
system extension number).
Related Features
For instructions for turning on the message light, see Message Light On
(F09XX).
Considerations
■ This feature turns off the message light on system phones and standard
phones that have message lights. (See Standard Telephones for a list of
standard phones with message lights.)
■ For message-waiting capability, standard phones with LED-compatible
message-waiting lights must be connected to the PARTNER Endeavor 62
processor or 362EC expansion module.
■ Do not use this feature for an extension that is covered by the voice
messaging system. The voice messaging system automatically turns off
the message light at a subscriber’s extension when messages in the
mailbox have been deleted.
If a message light is inadvertently turned off at an extension that has a
message in the mailbox, the message light is refreshed during the voice
messaging system’s daily maintenance (3 a.m.).
■ If you use the Message Light On feature to signal someone at a doorphone
extension, you must use this feature to turn the light off.
■ You can program a Message Light Off button on a system phone to turn the
message light off at a specific extension with one touch.
Programming
(See Figure 2-2 on page 2-19 for the location of special programming buttons
such as
s and e on system phones.)
To program a Message Light Off button:
1. Press
f 0 0 s s c at extension
10 or 11.
2. Enter the number of the extension to be programmed with this feature.
3. Press a programmable button.
4. Press
f 1 0.