Filter
Top Products
Problems with System Phones
6-13
Intercom Autodialer Does Not Work Properly
Possible Cause 1:
Telephone cord is plugged into wrong jack on bottom of
Intercom Autodialer.
What to do:
Plug the modular telephone cord into the correct jack—see the
PARTNER Endeavor Installation
guide for instructions.
■ If the Intercom Autodialer works properly, the problem is solved.
■ If the problem remains, go to Possible Cause 2.
Possible Cause 2:
Intercom Autodialer is not receiving auxiliary power.
What to do:
Make sure the Intercom Autodialer is plugged into an electrical outlet.
■ If the Intercom Autodialer works properly, the problem is solved.
■ If the problem remains, go to Possible Cause 3.
Possible Cause 3:
The cord is defective.
What to do:
Unplug the cord from the base of the Intercom Autodialer and the wall
jack. Replace the cord with a cord that you know works.
■ If the Intercom Autodialer works, the cord is faulty. Call the hotline to
arrange for a replacement.
■ If the Intercom Autodialer does not work, call the hotline.