Filter
Top Products
Group Calling—Ring/Page (I7G/I*7G)
5-107
■ To
transfer
a call to the Calling Group, while on a call, press the button
programmed for
ringing
a Calling Group. You can hang up or stay on the
line to announce the call.
All available extensions in the Calling Group ring.
To manually ring or page a Calling Group:
1. Lift the handset and press
i.
You hear intercom dial tone.
2. Dial 7 and a group number (1–4).
All available extensions in the Calling Group ring.
To make a
paging
call, press * 7 and a group number (1–4). After the
beep, start talking.
Your voice is heard through the speakers of all system phones that are not
busy in the Calling Group. If someone answers the page, you are
connected to that person and the rest of the Calling Group no longer hears
the page.
To manually transfer a call to a Calling Group:
1. While on a call, press
&.
2. Dial
7 and a group number (1–4). You can hang up or stay on the line to
announce the call.
All available extensions in the Calling Group ring.
Standard Phone
NOTE:
Standard phones can be used to make calls when plugged into any port of
the PARTNER Endeavor 362 processor module or 362EC expansion
module. However, standard phones will ring only when plugged into the Tip
Ring ports, which are the bottom two ports.
To ring or page a Calling Group:
1. Lift the handset.
You hear intercom dial tone.
2. Dial 7 and a group number (1–4).
All available extensions in the Calling Group ring.
To make a
paging
call, press * 7 and a group number (1–4). After the
beep, start talking.
Your voice is heard through the speakers of all system phones that are not
busy in the Calling Group. If someone answers the page, you are
connected to that person and the rest of the Calling Group no longer hears
the page.