Filter
Top Products
Display Language (#303)
5-87
Display Language (#303)
Description
This System Programming procedure identifies the language in which display
messages appear if the extension has a system display phone. The language is
set for each extension, so phones in the same system can display different
languages.
Valid Entries
1 = English ✔
2 = Spanish
3 = French
Programming
(See Figure 2-2 on page 2-19 for the location of special programming buttons
such as
s and e on system phones.)
To change the Display Language setting for an extension:
1. Press
f 0 0 s s # 3 0 3 at extension
10 or 11.
2. Enter the number of the extension to be programmed.
The current display language displays.
3. To change the display language, press D until the appropriate value
displays.
4. To change the display language for another extension, press
n or
until the extension number shows on the display. Then repeat Step 3.
5. Select another procedure or exit programming mode.