Filter
Top Products
Introduction to Installation
■ Form 2c, System Numbering—Trunk Jacks
■ Form 3a, Incoming Trunks—Remote Access
■ Form 3b, Incoming Trunks—DS1 Connectivity
■ Form 3d, Incoming Trunks—DID
(100D Module)
Connecting Data Equipment
The following forms indicate the data equipment needed to setup data
stations and modem pools, as described in Chapter 6:
■ Data Form 1a,
■ Data Form 1b,
■ Data Form 2a,
■ Data Form 2b,
Modem Pool—Analog to Digital
Modem Pool—Digital to Analog
Analog Data Station
Digital Data Station
■ Data Form 3, Data Hunt Groups
Programming the System
If you have a system programming diskette that was created using SPM, you
do not need to program the system. Use that diskette to restore the system
as described in Chapter 7. If you did not receive this diskette and it is your
responsibility to program the system, see the System Programming guide for
instructions. Each programming procedure indicates the appropriate form.
System Forms
1-5