Filter
Top Products
Installing Applications
Hardware Requirements
■
MERLIN MAIL Voice Messaging System unit and power cords
■
remote maintenance device (with a wall-mount transformer)
■
modem cable with a 9-pin connector at one end and a 25-pin
connector at the other end to connect the remote maintenance device
to the serial port on the MERLIN MAIL Voice Messaging System unit
■
D4BU modular cords (two for a 2-port system or four for a 4-port
system, plus one for the remote maintenance device)
■ 012 basic telephone module
NOTE:
■ Additional touch-tone receivers (TTRs) may be needed for
the 012 module to handle a large number of voice
connections.
■ MERLIN MAIL Voice Messaging System connects to two or
four 012 basic telephone module jacks on the control unit.
■ The MERLIN MAIL Voice Messaging System unit can be
desk- or wall-mounted and should be placed in an area with
low humidity and proper ventilation.
■ Follow the power and ground procedures for T/R
telephones that require auxiliary power.
Installation Procedure
See the documentation indicated below for installation procedures.
8-26
MERLIN MAIL Voice Messaging System