Installing Telephones and Adjuncts
SYSTIMAX
SYSTIMAX is a wiring kit that contains all the hardware needed to build a
cross-connect field between the control unit and the telephone jack.
CAUTION:
To avoid coupling power supply noise onto system wiring,
allow at
least 3 inches (7.62 cm) of clearance between the basic carrier’s
power supply and any wiring or termination hardware located left of
the control unit.
With each kit you can build up to 24 jacks. The maximum number of
telephones on the system is 144, which would require six kits.
Hardware
Each kit includes the following:
■
■
■
■
■
instructions and parts sheet
template-full scale
two 110AB1-100JP12 termination blocks with modular jacks
one 110AB1-100FT field-terminated block
110A1 wire troughs
D-rings
110P8A5B patch cords (4-pair)
D8W cords
■
■
■
Connecting the Telephones to the Control Unit
3-53