AT&T Release 2.0 Telephone User Manual


 
lnstalling Applications
Hardware and Software Requirements
an approved PC with 640K RAM, 3.5-inch floppy disk drive, and
20 Mbyte hard disk drive.
an approved monochrome or color monitor
CMS interface card with two 14-ft (4.27-m), 4-pair modular plug
telephone cords and one 14-ft (4.27-m) DIN connector cord for
connection to DA-5 Digital Voice Announcer
CMS software
DA-5 Digital Voice Announcer for CMS
parallel printer
parallel printer cable to connect the printer to the PC
supervisor console—MERLIN II System Display Console
agent telephones—any MLX or analog multiline telephones supported
by the communications system
two analog multiline modules (008 or 408); one to connect the two PC
ports to the operator positions, and one to connect the CMS supervisor
console
MS-DOS Operating System, disk version 3.3
Installation Procedure
For a list of optional hardware that can be used with CMS, and for detailed
installation procedures, see the “CMS Documentation” section below for the
appropriate document title.
CMS comes with a hardware installation checklist and information on installing
the CMS software, creating an agent directory, programming lines and
groups, and testing and managing calls. The control unit permits the
connection of two CMS applications, and each application can have one PC.
Call Management System
8-13