Filter
Top Products
lnitializing and Testing the System
Group Calling Test
Follow these steps to test the Group Calling feature:
1. Make sure that each group member is logged into the group by having
each member dial
#44.
2. At any telephone, pickup the handset and dial the trunk that is
programmed to ring for a calling group.
3. At the ringing telephone, have someone pickup the handset verify
that you have good two-way communication.
4. Repeat Steps 2 and 3 for each calling group.
5. Make additional calls to check each member of each calling group.
6. At any telephone, pick up the handset and dial the group extension
number.
7. Test the calling group delay announcement (if provided):
a. Make the whole group busy or log out all members of the group
(by having each member dial
#
✱
44
).
b. Repeat Steps 2 and 3 for each calling group.
8. At the ringing
telephone, have someone pick up the handset and verify
that you have
good two-way communication.
System Speed Dial Test
Follow these steps to test System Speed Dial:
1. Determine which numbers have been translated for System Speed Dial.
(Get the list of translated numbers from the system manager.)
2. From the test telephone, pick up the handset and dial a System Speed
Dial code.
Verify that you have good two-way communication and that the correct
party was reached.
Testing the System
7-23