Filter
Top Products
Initializing and Testing the System
.
8. Test telephones that have been programmed for Night Service with
Outward Restriction.
a. Pickup a handset on a restricted telephone and verify that
outside calls are not allowed.
b. Using the password, make an outside call.
i.
Hang up the handset.
ii. Press the Recall button and dial the password.
NOTE:
On an MLX telephone without a programmed
Recall
button, press
Feature
and dial
775
and the
password before picking up the handset.
iii. Pick up the handset and make an outside call.
iv. Verify that you have good two-way communication and
hang up.
9. At the operator console, press the Night Service button again and
verify that the Night Service LED turns off.
Testing the Dictation System Access
Place a call to verify that the dictation system access equipment can be
accessed. If dictation equipment has not been installed, this feature cannot
be tested.
1. At the test telephone, pickup the handset.
2. Dial the access code and the number associated with the dictation
equipment.
Testing the System
7-27