Filter
Top Products
Initializing and Testing the System
Testing the DSS
At each Direct Station Selector (DSS), check that all lights are operational.
Using the DSS, call a telephone in the system. Test that the page buttons on
the DSS work properly.
Testing the Night Service
Follow these steps to test the Night Service feature on the system operator
console:
1.
2.
3.
4.
5.
6.
7.
At the system operator console, press the Night Service button. If the
Night Service with Outward Restriction option is programmed, you will
need to enter the assigned password after pressing the Night Service
button.
The Night Service LED turns on.
NOTE:
Night Service on a DLC can also be activated by pressing Feature
and dialing
39.
Pick up the handset and press a button for any outside trunk.
Dial the number of an operator console that is programmed to receive
Night Service coverage.
Verify that the telephones assigned to the Night Service group are
ringing.
Have someone pick up the handset at a telephone in the Night Service
group; verify that you have good two-way communication.
At both telephones, hang up.
Repeat Steps 2 through 5 for each operator console that is
programmed to receive Night Service coverage.
7-26 Testing the System