Filter
Top Products
Installing the PC, CAT, or Printer
Connecting a Printer (50 Feet or More)
Use the hardware and procedure described in this section to connect a
printer to the control unit if the following conditions apply:
■ the printer is not a CAT printer connected to a CAT
■ the printer is 50 ft (15 m) or more from the control unit
■ the printer is not grounded to the same AC outlet as the control unit
■ the printer is not grounded to an outlet that is on the same 117-VAC
branch as the control unit and that is 50 ft (15 m) or less from the
control unit
NOTE:
If the printer is being installed in a different room than the control unit,
make sure that both locations have working wall outlets and wall jacks,
and that the building wiring has been connected so that the wall jacks in
each location communicate with each other.
Connecting a Printer to the Control Unit
5-15