Filter
Top Products
Installing the PC, CAT, or Printer
Connecting a Printer to the
Control Unit
A printer can be connected to the SMDR jack on the control unit.
The following printers are supported:
■ AT&T
■ AT&T
■ AT&T
■ AT&T
■ AT&T
NOTE:
572 Printer
475/476 Printer
Call Accounting Terminal (CAT) Printer
Call Accounting System Printer
Applications Printer
The AT&T 570 printer is not compatible with the system.
Printer connection varies depending on the printer model, whether the printer
is grounded on the same AC outlet as the control unit, and whether the printer
is within 50 ft (15 m) of the control unit. All methods are explained in this
chapter:
■
■
■
■
If the printer is an AT&T CAT serial printer used with a CAT and is
grounded to the same AC outlet as the control unit and within 50 ft
(15 m) of the control unit, skip to the section, “Connecting a CAT and
Printer on the Same AC Outlet.”
If the printer is an AT8tT CAT serial printer used with a CAT and is
either not grounded to the same AC outlet as the control unit or more
than 50 ft (15 m) from the control unit, skip to the section, “Connecting
a CAT and Printer on a Different AC Outlet.”
If the SMDR or CAT printer is within 50 ft (15 m) of the control unit and
is connected to the same 117-VAC branch as the control unit, skip to
the section, “Connecting a Printer (Within 50 Feet)”
If the SMDR or CAT printer is more than 50 ft (15 m) from the control
unit and is not connected to the same 117-VAC branch as the control
unit, skip to the section, “Connecting a Printer (50 Feet or More).”
5-8 Connecting a Printer to the Control Unit