Filter
Top Products
Installing Applications
InnManager Guest Management
System
The InnManager Guest Management System is a stand-alone, DOS-based,
integrated property management application combining all real time front-
desk operations and record keeping. Suitable for hotels with up to 100
extensions, InnManager allows functions such as reservations, inventory,
maintenance, check-ins and check-outs, call accounting, billing, and audits to
be performed.
For additional information, see the “InnManager Documentation” section later
in this chapter.
Considerations
■ InnManager operates on an approved AT&T PC operating with DOS
version 3.3. The PC must be dedicated to the InnManager, although
specific applications such a spread-sheet or word-processor may co-
reside on the PC and be used to supplement InnManager.
■ Only one InnManager can be connected directly to the system.
Additional InnManager terminals can be networked to the “host”
InnManager PC.
Hardware Requirements
A typical InnManager system consists of the following equipment:
■ An approved AT&T DOS-based PC with the following configuration:
— 640K RAM
— 40MB hard drive
— parallel printer output (AT&T Master Controller-II is
recommended)
— serial SMDR input
8-16
InnManager Guest Management System