Filter
Top Products
Installing the PC, CAT, or Printer
Hardware
■ 248B adapters
■ 355AF, 355A adapters
■ 400B2 power adapters
■ D8W cords
■ D6AP power cords
■ D8AM modular crossover cable
■ M7U null modem cable
■ Z3A2, Z3A4 ADUs
■ 2012D transformer
■ Z200A EMI filter
Procedure: Connecting a CAT Printer on a Different AC Outlet
1.
2.
3.
4.
5.
6.
7.
8.
Plug the short end of the Z200A EMI cord into the SMDR jack on the
control unit (the upper jack).
Plug the other end of the Z200A EMI cord into a 355AF adapter.
Connect the female connector on the 355AF to one end of the M7U null
modem cable.
Connect the other end of the M7U null modem cable to the 25-pin
female connector on a Z3A4 ADU.
Plug one end of a D8W cord into the
WALL
jack on the Z3A4 ADU.
Plug the other end of the D8W cord into a modular jack on the D8AM
modular crossover cable.
Plug the other end of the D8AM modular crossover cable into the top
jack on the 400B2 power adapter.
Plug the 400B2 power adapter into the control unit-side wall jack.
Make sure that building wiring has been set up so that the control unit-
side wall jack communicates with the printer-side wall jack.
Connecting a Printer to the Control Unit
5-11