Filter
Top Products
Installing Telephones and Adjuncts
■ Automatic. This setting is used in one of two ways:
—
with a device, such as an answering machine or a
modem, to answer calls. An Auto Answer+All button
is needed so that calls can be answered automatically.
— to make and receive calls on the telephone while using
a computer or modem that is attached to the GPA. This
is called simultaneous voice and data.
Answering Machines
Connect the answering machine to one of the following, as described earlier
in this section:
■ single-line telephone
■ MLX telephone with an MFM
■ GPA and analog multiline telephone
If the telephone is not built in to the answering machine, connect a 267A2
bridging adapter to the telephone using any industry-standard device that
recognizes a 600-ms disconnect signal.
Answering devices that disconnect automatically, such as voice-reset
disconnect timers and fixed recording timers, are also supported.
Cordless Telephones
Connect the cordless
this section:
telephone to one of the following, as described earlier in
■
■
012 module
MLX telephone with an MFM
When connected through an MFM port, the cordless telephone places
and receives calls independently of the MLX telephone.
Using a GPA with an analog multiline telephone is not recommended; the
cordless telephone cannot dial out through the GPA.
3-16 Installing Adjuncts