Filter
Top Products
Installing Applications
Hardware Requirements
■ an approved PC or other DOS compatible PC with the following:
— at least 512K of RAM
—
a double-sided floppy diskette drive (either 5.25-inch or
3.5-inch)
—
a serial port assigned to COM1 or COM2. The serial port can
use either a DB-9 or DB-25 connector. If a DB-9 connector is
used, a 9-pin to 25-pin adapter is also required. The 9-pin
side must be female.
■ video monitor (monochrome or color)
■
D8W cord and 355AF Adapter if PC is within 50 ft (15 m) of the control
unit. Distances of greater than 50 ft (15 m) require back-to-back
ADUs.
Installation Procedure
See the System Programming & Maintenance (SPM) guide for installation
instructions.
8-30 System Programming and Maintenance (SPM)