Filter
Top Products
REMOTEAOMlN&MAlNTPROCEDURES
SECTlON200-096-600
FEBRUARY1991
s
TABLERM-AL
PROGRAM48
STATION TOLL RESTRICTION CLASSIFICATION
iTEP
ACTION
DISPLAY/PRINTOUT
1 Enter the Program Mode
>MODE PROG
At the >MODE prompt, enter 1 a m 1
q
.
P
2 Enter Program Number 48
P 48
Pressm . P48
3 Refer to the System Record Sheet and enter the required port
P48 0 0
number.
Example: Port 00, enter 1 1
4
Press 1 key. The system will display the present data as a
P48 0 0 # 13
2-digit code: The first digit designates digit free or digit restrict.
The second digit is the station restriction code. Refer to the
System Record Sheet and change if required.
5
To Exit Program/Store Data
A) To store data, press
q
P48 0 0 # 13
p48 # #
B) Continue returning to step 3 until all data is recorded for this
P
program.
C) To exit this program, press 1 1 (9.
TABLERM-AM
PROGRAM50-1
LCRPARAMETERS
STEP ACTION
DISPLAY/PRINTOUT
1
Enter Program Mode
>MODE PROG
At the >MODE prompt, enter i m m 1
q
.
P
2 Enter Program Number 50.
P 50
Press
q
. P50
3
Enter 0 . Refer to the System Record Sheet and enter the required ~50 1 01 N
key/LED number.
Example: Key 01, enter1 0 .
4 Refer to the System Record Sheet and change key/LED status,
P50 1 01 N
if required.
02 N
Press m to move to next key/LED.
5
To Exit Program/Store Data
P50 1 01 N
A) To store data, pressm
02 N
B) To exit this program, press [ 1
q
.
p50 # #
P
-39-