PROGRAMMINGPROCEDURES-INSTRUCTIONS/SYSTEMRECORDS
SECTION 200-096-302
FEBRUARY1991
PROGRAM51
LCRAREACOOES
SELECT = LCR -
‘Ian N”mber (’ * ‘)
Action Code:’
’ DATA = Area Code(s)
Enter 2 to add code to table.
(3 digits)
Enter 3 to delete code from table.
Enter 4# to display codes in table.
DATA = Area Code(s) DATA = Area Code(s)
DATA = Area Code(s) DATA = Area Code(s)
DATA = Area Code(s) DATA = Area Code(s) DATA = Area Code(s) DATA = Area Code(s)
NOTES: NOTES:
1. For more information, see the instructions preceding the record sheets. 1. For more information, see the instructions preceding the record sheets.
2. Initialized data leaves Tables 1 - 7 blank; all codes (000 - 999) are initialized in Table 8. 2. Initialized data leaves Tables 1 - 7 blank; all codes (000 - 999) are initialized in Table 8.
3. To enter a range of Area Codes, press 3. To enter a range of Area Codes, press
Low Area Code
High
Area Code
besignates
end of string
4. Several ranges or individual codes can be expressed at once by separating them with a 1 key.
2-141