Filter
Top Products
STRATA DK
GENERAL DESCRIPTION
DECEMBER 1990
”
FIGURE 7-IO-button ELECTRONIC TELEPHONE
FIGURE 8-20-button ELECTRONIC TELEPHONE
l Called Station Messaging
l Calling Station Messaging
l Busy Station Messagingt
l Group/Remote Station Messaging-t
l Busy Lamp Field (BLF) Indication
l CO Line Identification
l Speed Dial Memo
l Timed Reminders with Messages
l Intercom User Name/Number Display
l Call Duration Display
System software allows the customer to
assign feature buttons on all electronic tele-
phones in a completely flexible manner.
j-Requires
Release 3
software
-8-
FIGURE 9-20-button LIQUID CRYSTAL DISPLAY
ELECTRONIC TELEPHONE
Electronic Telephone Upgrade Options: All
electronic telephones may be upgraded with
off-hook call announce, loud ringing bell, and
headset capability.
l Off-hook Call Announce Upgrade: Each
electronic telephone may be upgraded to
receive intercom calls when the handset is
off-hook by installing an off-hook call
announce upgrade assembly.
l The assembly consists of two PCBs,
HVSU and HVSI, which install inside the
telephone base with plug-in connectors.
l Only those telephones programmed to
receive OCA announcements require
the OCA upgrade.
l Each station PCB (PEKU or PESU) that
supports electronic telephones with
OCA capability must be equipped with
an EOCU subassembly.
l Loud Ringing Bell/Headset Upgrade:
Each electronic telephone may also be
upgraded to provide a loud ringing bell
interface and a modular headset interface.
To accomplish this, an upgrade assembly
consisting of a small PCB (HHEU) installs
inside the phone with a plug-in connector.
l An external speaker (HESB) can be
directly connected to the upgraded
phone. When-the phone rings, the
HESB produces a loud tone that mimics