Toshiba DK96 Telephone User Manual


 
PROGRAMMINGPROCEDURES-INSTRUCTIONS/SYSTEMRECOROS
SECTION 200-096-302
FEBRUARY1991
PROGRAM29-1
DIGITALDSSANDDSSCONSOLEKEYASSIGNMENTS
CONSOLE1
SELECT = 1
DSS Number 1-4:
Each system can have up to 4
No. 01 - No. 20
Press the LED/key that
dial, CO line access, or DSS
consoles. Enter the console to which
is in the same position
station access code to the
keys are being assigned (DSS console 1).
as the console key being
key chosen. See code
DSS Key Group 1-3:
assigned. The LED
table below for the keys
Each console has three groups lights and the LCD
to enter. See Notes 4 and 5.
of 20 LED keys. Choose displays the console
the group to be assigned, key’s number.
Console 1
Code Table
I
f NOTES:
Ill
I
92
I
1. For more information, see the instructions preceding the record sheets.
2. Initialized data associates the PEKU or PDKU’S console with the telephone
connected to PEKU or PDKlJ’s first port.
See Program 28 to reassign consoles
to other telephones.
3. When assigning CO line access keys (0 1 - 36), the associated telephone must be
assigned access to the CO line also.
See Program 40.
4. The
q
and
q
keys may be changed tom,
q
arm keys, but they may not
be reassigned to other key locations.
5. Initialized data assigns
q
(Code 89) to Group No. 3 key 19 andm (Code 91) to
Group No. 3 key 20 on all consoles. All other keys are initialized as DSS keys to
ports 00 - 57, in sequential order.
6. Initialized key assignments are shown after Program 29.
7. Important: Onlyprogramm,
q
, m,
q
, andm buttons;programming other
feature buttons on a console may cause system operation problems.
2-66