Filter
Top Products
OUTSIDE CALLS
INTERCOM CALLS
TO MAKE AN OUTSIDE CALL
1) Lift the handset
l
You will hear intercom dial tone.
2) Dial the CO line access code.*
3) Listen for CO (outside line) dial tone.
4) Dial the desired telephone number.
5) Hang up when the call is completed.
*Dial 1 to access the general group or to use /east cost
dial a CO line number d 11 * 0 11); or dial
to access line groups 1 * 8, respectively.
TO RECEIVE AN INCOMING CALL
1) You will hear ringing (two short rings every four seconds’ or
one ring every four seconds*).
2) Lift the handset.
3) Hang up when the call is completed.
NOTES:
1. Two short rings indicate a direct outside call (optional
with
Release
2 and higher).
2. One ring every four seconds indicates an intercom call
or a transferred outside call.
TO MAKE AN INTERCOM CALL
1) Lift the handset.
l
You will hear intercom dial tone.
2) Dial the desired station number.
l
You will hearasingle ring tone if calling to an electronic
or digital telephone.
3) Speak when the ring tone ends.*
4) Hang up when the call is completed.
* If you are calling another standard telephone, ring tones
will continue. Wait for an answer. Tone signaling can be
accomplished when calling an electronic or digital tele-
phone by dialing 0 after the station number.
TO RECEIVE AN INTERCOM CALL
1) You will hear a ringing signal (1 second on-3 seconds off).
2) Lift the handset and speak to the caller.
3) Hang up when the call is completed.
2