Filter
Top Products
PROGRAMMINGPROCEDURES-INSTRUCTIONWSYSTEMRECORDS
SECTION 200-096-302
FEBRUARY1991
assigned in
Program
30) to break into and
overhear an existing station conversation.
A warning tone can be set optionally to be
heard by the conversing parties.
l
External Page Included with All Call
Page, LED
15-If the all call voice page
access code (39) is dialed, external page
(all zones) may be included or omitted with
this option. This option does not affect the
All Call (m) button function; them button
activates electronic and digital telephone
speakers only, never external page.
l
Privacy Override Warning Tone, LED
14-Privacy Override allows a station to
enter into, and overhear, an existing CO
line conversation by pressing a CO line
button (if the called station is assigned in
Program
30). A warning tone can be set
optionally to be heard by the conversing
parties.
l
Auto Callback Camp-on Tone, LED 13-
1
A busy called digital or electronic telephone
user may optionally hear a one-time beep
tone (from the speaker) signifying that an-
other station has tried to call and has
activated the Automatic Callback feature.
l
CO Line Beep Tone, LED
12-If this LED
is lit, a beep tone will be sent every three
minutes to stations on outgoing CO line
calls.
l
DTMF Tone Return, LED 1
I-This option
can delete DTMF tones that are returned to
I
digital or electronic telephones when
manually dialing or speed dialing. It also
eliminates auto dial digits returned to call-
ers when digits are automatically sent to
voice mail ports on forwarded calls
(Re-
lease
2 and above).
l
Background Music/Music-on-Hold
Separation, LEDs IO and
9-A separate
background music source can be sent to
I
digital telephone speakers, electronic
telephone speakers, and external page
speakers, while another music-on-hold
source can be sent to outside lines or
I
internal stations on hold. With
Release 3,
the background music source connects to
circuit 3 of a PEKU PCB or circuit 8 of a
PESU PCB in any s!ot
(see Program 19).
With
Release
2, the background music .,,
connects to the same circuits on the same
-:
PCBs, except that the PEKU or PESU
must be installed in slot 01. No matter what
release, the music-on-hold source con-
nects to the PCTU or PCTUS PCB’s P6
terminal.
l
Display Dialed Number Timing, LED 08-
An LCD telephone will display a dialed
number for either 15 or 60 seconds before
the display changes back to the normal
time and date format.
l
Standard Telephone Distinctive Ring,
LED
07-The outside-call ring pattern to
standard telephones, can be made distinct
from the intercom ring pattern. If Distinctive
Ring is enabled, the CO-line call ring pat-
tern will be 0.2-seconds on, 0.4-seconds
off, 0.2-seconds on, 3.4-seconds off; if
Distinctive Ring is not enabled, the pattern
will be per
Program 10-1,
LED 06. Inter-
com calls, with or without Distinctive Ring
enabled, ring 1 -second on and 3-seconds
off. This option is available with
Release 2
and above software only.
l
Voice Mail Identification Code, DTMF
Signal Time, LED
06-DTMF digits auto-
matically sent to PSTUIPESU voice mail
ports can be sent in either 80- or 160-
millisecond bursts. This applies to digits
sent via voice mail identification code 656/
657 set at each station. This option is
available with
Release
2 and above soft-
ware only.
l
TIE/DISA Busy Tone Cadence, LED 05
(Release
3)-Select the busy tone ca-
dence for DISA/TIE lines with this LED.
Light the LED for a 0.5 second cadence
(Bell Precise Busy Tone Cadence); Leave
it OFF for the STRATA 0.25 second busy
tone cadence. The Bell Precise Busy Tone
cadence should be selected so callers will
know that they have reached a busy station
when calling in on a TIE or DISA line. If it is
not selected, the busy tone may be confused
with the reorder tone cadence.
l
VM Message Waiting Cancel Via Dial 1
DAutomatic, LED
u4--“Diai~~‘should be
enabled if the DK system is connected to a
2-4