PROGRAMMINGPROCEDURES-INSTRUCTIONS/SYSTEMRECORDS
SECTION 200-096-302
FEBRUARY1991
PROGRAM45-1
LCR/lOLLRESTRlCTlON DIALPLAN
SELECT = 1 DA-TA = Plan 1 - 5
Enter codes 1 - 5 to indicate
the dial plan for the system.
Releases 1 and 2
X Plan
Toll Restriction/LCR
Dial Plans
5 0+ (Note 7)
4
Universal (Note 7)
3 1 +AC+NXX/NNX
2 1 +AC+NNX/i +NNX
1 AC+NNX/l +NNX
Release 3
X
Plan
5
4
3
2
1
Toll Restriction/LCR
Dial Plans
0+ (Note 7)
Universal (Note 7)
1 +AC+NXX/NNX
1 +AC+NXX/l +NNX
AC+NXX/l +NNX
IMPORTANT: The correct Dial Plan must be assigned to allow system LCR and/
or Toll Restriction to function properly.
NOTES:
1. Initialized data assigns Dial Plan Code 1 to the system,
2. InNXXandNNX,X=O-9,
N=2-9.
3. NXX = Office code (interchangeable; 2nd digit can be I or 0).
4. NNX = Office code (not interchangeable; 2nd digit cannot be 1 or 0).
5. AC = Area Code.
6. 0+, and universal (code 5 + 4) are not used in USA.
7. 1+ NNX indicates 1 may be dialed before office codes.
2-125